Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm

GZ Industrial Supplies Nigeria is the distributor of Bosch Power tools in Nigeria.Our Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm allows drilling dust-free. During drilling, the dust is extracted through the drain holes through the built-in vacuum section, so that the drilling dust and grit are optimally removed without additional work. This technique ensures a clean and dust-free working environment. The Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm  is suitable for drilling in masonry, concrete and reinforced concrete.Our Bosch Professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm fits on rotary hammers with an SDS-plus shank and works in combination with professional M-class vacuum cleaners.

The Bosch Professional Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm drill is available as a 4-edged drill bit for larger diameters and as a 2-edged drill bit for smaller diameters and is equipped with an Activeteq centering ring. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill guarantees that this drill falls within close tolerances, drills very accurately and does not slip while drilling mounting holes. 

Key Features of Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm

• Dust-free drilling is possible with the SDS-plus-9 Speed Clean drill
• During drilling, the built-in vacuum section extracts the dust through the drainage holes, so that the drilling dust and grit are optimally discharged without extra work
• This technology ensures a clean and dust-free working environment
• The drill is suitable for drilling in masonry, concrete and reinforced concrete
• This drill fits drill hammers with an SDS-plus shaft and works in combination with professional M-class vacuum cleaners
• The SDS-plus-9 Speed Clean drill is available as a drill with 4 cutting edges for larger diameters and as a drill with 2 cutting edges for smaller diameters and is equipped with an Activeteq centering ring
• The wear indicator indicates whether the diameter of the hole is within the tolerance, which is necessary to accurately place the metal anchor
• The quality mark of the PGM Masonry Drill Bit Association Board on this drill guarantees that this drill falls within close tolerances, accurately drills and does not shoot away when drilling fixing hole

Specification of Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm

Technical Specification of Bosch professional SDS-plus-9 Speed Clean 18 X 320 x 450 mm