Dr. Fixit 603 Newcoat 20 Liters

Dr. Fixit 603 Newcoat 20 Liters

GZ Industrial Supplies is the supplier of Dr. Fixit waterproofing chemicals in Nigeria. Our Dr. Fixit 603 Newcoat is a heavy duty terrace waterproof coating system, composed of specially developed highly elastic & resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments, micro-fibres, additives & best quality fungicidal in water medium. It is used as a liquid applied waterproofing membrane for all types of building terraces. Dr. Fixit Newcoat is a three-layer system with coats in different colours ensuring proper build-up of the thickness, making it a reliable waterproofing system. The coating performance can be enhanced for large roofs, by providing a fibre mesh that is embedded or sandwiched between the coats.

Areas of Application of Dr. Fixit 603 Newcoat

• Building roofs / Terraces– Flat & sloping.
• Over existing cementitious waterproofing treatments like brickbat coba, concrete screeds, acrylic coatings, etc.

Features & Benefits

• Film thickness – Provides higher dry film thickness of 1 to 1.25 mm in three coat application
• Crack bridging - Bridges cracks up to 2 mm width
• Application advantage - No need to remove existing sound brickbat coba, plaster, concrete surface
• Suitability - Can be used for flat as well as sloping roofs
• Strength - Higher tensile strength, tear resistance & bond strength with cementitious substrates
• Resilience – Forms highly elastic & resilient coating so helps to withstand the structural movements
• Durability – Resistant to UV & weather conditions
• Abrasion resistant – No additional protective coating is required for roof subjected to foot traffic
• Ease of application – Can be applied by brush & roller easily
• Weight addition – Light in weight does not add extra weight over the roof
• Toxicity – It is non-toxic in nature
• Breathability – It is breathable
• Easy to recoat existing surfaces coated earlier with Dr. Fixit Newcoat

Method of Application

1. Begin by thoroughly preparing the surface. Clean it by washing away dust, dirt, oil, grease, and any loose particles.
2. For existing old terraces with brickbat coba or screeds, inspect the substrate to ensure its soundness.
3. Cut and remove any damaged or hollow portions, as well as sharp edges, until reaching the mother slab.
4. Recoat the slab with a slurry of Dr. Fixit Pidicrete URP and cement in a 1:1 proportion. After drying, reinstate the brick bat coba in that portion by mixing Dr. Fixit Pidicrete URP in both the base slurry and the top coba.
5. In areas where the coba is sound, fill surface cracks wider than 5 mm with Dr. Fixit Crack-X or polymer-modified mortar. For cracks less than 2 mm, clean them free of dust using a vacuum cleaner.
6. Apply Dr. Fixit Primeseal to the crack and allow it to dry. Then pour Dr. Fixit Newcoat into these cracks and wait for it to dry.
7. Ensure that the roof slope is a minimum of 1 in 100.
8. If there are existing bitumen-based waterproofing treatments, remove them completely using mechanical scarification or other effective mechanical means.

Contact us for further details and availability within the storefront in your location.