Gulfsea Hyperbar Super CS

GulfSea HYPERBAR SUPER CS grease is heavy duty calcium sulfonate complex soap based grease for use in a wide range of marine, industrial and automotive applications. It is manufactured from high quality semisynthetic base oils and performance additives to provide good structural stability, resistance to water washout and effective protection from wear and corrosion. It is specially designed to deliver outstanding performance in severe application areas like marine, mines, offshore and heavy duty off-highway equipment.

Features and Benefits

•  Superior extreme pressure properties extend bearing life under shock-load conditions.
•  Outstanding mechanical stability and resistance to softening ensures long lubricant life and prevents leak out of bearings even in the presence of water.
•  Excellent corrosion protection and resistance to water washout resulting in improved component protection and equipment life.
•  Good adhesive property ensures that the grease stays in place for longer relubrication intervals.
•  Very good low temperature fluidity / pumpability even in cold weather making it ideal for use in centralised lubrication systems in marine, industrial and automotive applications.
•  High drop point ensures extended operating range of up to 150ºC.

Application

•  Heavy duty equipments used in marine, off-shore, cement, mining / quarrying, agriculture & forestry/ logging, off highway and other industrial as well as automotive applications.
•  Slide rails, metal cables, wire ropes, winches, open gears, chains, etc under severe conditions.
•  General lubrication of axles, ball joints, universal joints, couplings, power take-offs, kingpins, bushings and disc brakes.

Specification

Type of base oil                                                  Semi-synthetic

Estimated operating temperature range       -25ºC to 150ºC

Base oil viscosity at 40°C; cSt D 445                         1720

Dropping point; ºC D 2265                                       260

Oil separation at 25°C for 24 hrs; %wt. D 1742         1

Oxidation resistance, pressure drop; psi D 942         5

Water washout at 79°C; %wt. loss D 1264              2.5

Four ball weld load; kgs D 2596                            >400

Timken load; lbs D 2509                                            60

SKF - EMCOR steel corrosion; rating D 6138            0-0

Copper strip corrosion at 100°C for 24 hrs; rating D 4048  1a

Rust Protection D 1743                                  Pass