LubeMax PowerTran Fluid J10W30C

LubeMax PowerTran Fluid J10W30C

GZ Industrial Supplies is the distributor and supplier of lubemax products in Nigeria. LubeMax PowerTran Fluid J10W30C Farm Tractor drivetrain hydraulic fluid is a multifunctional fluid specially formulated for use in farm tractors and other off-highway equipment requiring one lubricant for the transmission, final drive, wet brakes and hydraulic systems. It meets the performance requirements of all major brands of farm tractors and other farm equipment that utilize a common fluid reservoir.

Features and Benefits of LubeMax PowerTran Fluid J10W30C

•  Excellent oxidation resistance and thermal stability
• Excellent wear protection for clutches, gears and hydraulic pumps
• Prevents brake chatter and grabbing
• Protects against rust and corrosion
• Excellent seal compatibility
• Good foam resistance
• Two viscosity grades for use in most climates

Recommendation use of LubeMax PowerTran Fluid J10W30C

Power Tran Fluid is recommended for use where the equipment manufacturer
• Denison Hydraulics HF-0, HF-1, HF-2
• Ford ESN-M2C134-D, ESN-M2C86-C,ESN-M2C86-B, ESN-M2C41-B
• Ford-New Holland FNHA-2-C-201.00
• John Deere JDM J20C, J20D (“Low Viscosity” grade), J14C (Type 303 Fluid)
• Kubota UDT Fluid
• Landini Tractor II Hydraulic Fluid
• Massey Ferguson CMS M1145/M1143, M1141, M1135, M1129A
• Sundstrand Hydrostatic Transmission Fluid
• Vickers (Eaton) M-2950-S, I-286-S
• Volvo VME WB 101 (VCE 1273.03)
• ZF TE-ML 03E, 05F, 17E, 21F
This product also meets API GL-4performance requirements.

Application of  LubeMax PowerTran Fluid J10W30C

This Fluid is recommended for use where the equipment manufacturer specifies:
• AGCO Power Fluid 821XL, Q-1826, Q-1802 (Type 55 Fluid), Q-1766B
• Case IH MS1210, MS1209, MS1207, MS1206
• Case New Holland (CNH) MAT3525 (134-D Fluid), MAT3506, MAT3505
• Caterpillar TO-2 (obsolete) 

FREQUENTLY ASKED QUESTIONS.

1. What is PowerTran Fluid?

PowerTran Fluid is a multi-functional fluid specially formulated for use in farm tractors and other off-highway equipment requiring one lubricant for the transmission, final drive, wet brakes and hydraulic systems. It meets the performance requirements of all major brands of farm tractors and other farm equipment that utilise a common fluid reservoir

2. How to change from another fluid to PowerTran Fluid?

Changing from another fluid to PowerTran Fluid may require some preparation and precautions to ensure a smooth transition. Some steps to follow are: 

• Check the compatibility of PowerTran Fluid with your existing system (seals, paints, metals, etc.)

• Drain the old fluid completely from the system

• Flush the system with a compatible flushing oil or solvent

• Fill the system with PowerTran Fluid according to the manufacturer’s instructions

• Monitor the system for any signs of leakage, contamination, or abnormal operation

3. How to choose the right viscosity grade of PowerTran Fluid for your application?

The choice of viscosity grade depends on the ambient temperature and the specifications of your equipment manufacturer. You should always follow the manufacturer’s recommendations and use the appropriate viscosity grade for your climate and operating conditions. If you are unsure, you can contact us for assistance.

RELATED ARTICLES. 

WHERE TO BUY INDUSTRIAL LUBRICANT IN NIGERIA

Contact us for Lubemax products and other quality lubricants.

Download Datasheet